Showing posts with label car infomation. Show all posts
Showing posts with label car infomation. Show all posts

09 February 2015

Why you should top up all the oils, not just the gas tank


Just as your body needs fluids to stay healthy, so does your car. Petrol may seem to be the most important one, but there are some that are just as vital to the car’s health, and others that can help with your safety.

“Make sure when you’re getting your car prepped for winter that you’ve topped up your fluids,” says Kevin McNamara, category business manager of automotive fluids for Canadian Tire. “Even when it’s cold outside, your engine can overheat if fluids aren’t moving through it.”

Oil is vital to your car’s health, since it lubricates the moving parts inside the engine and also helps dissipate some of the excess heat it creates. Without oil, an engine could be irreparably damaged in less than a minute.

The oil should be changed and the oil filter replaced at the intervals recommended by the auto manufacturer.

In between changes, it’s a good idea to occasionally check the oil level, especially on an older car. Top it up if necessary, but don’t overfill it, since too much oil can also be harmful.

Synthetic oil is a good (if initially more expensive) choice, not just because it lasts longer and needs to be changed less often, but also because its microscopic particles are more uniform and can do a better job of lubrication than conventional oil.

Engine coolant is commonly known as anti-freeze because its freezing point is well below that of plain water. It absorbs heat from the engine and then flows into the radiator, where it is cooled and sent back out to the engine in a continuous loop.

This fluid should be checked at least twice a year with a coolant tester to be sure it’s still able to withstand cold temperatures. A technician can do this for you, but if you do it yourself, check it only from the coolant reservoir, never by opening the radiator cap.

You should always carry a spare jug of washer fluid and keep the reservoir filled, especially if you do a lot of highway driving, where it can be dangerous to pull over and fill it. You can go through it quickly when other vehicles splash salt up from the road, which quickly dries to an opaque crust. All washer fluid will clean away the grime, but look for all-season or winter-specific options.

“Use fluid with a temperature rating for your province,” McNamara says. “If you use summer fluid, it could freeze in the reservoir and potentially damage it.”

Fluid facts

  • If your locks freeze, use lock de-icer; never warm water. Always keep the de-icer bottle with you, not stored in the glovebox.
  • A car’s “curb weight” is the weight of the vehicle plus all of its fluids, including a full tank of fuel.
  • Other fluids your car may contain include transmission oil, power steering fluid, differential oil, brake fluid, and battery electrolyte.




Kixx is the engine oil products of GS Caltex.

GS Caltex was founded in 1967 as a 50/50 joint venture between Chevron and LG Group of South Korea. Now Kixx australia is opened. and It is ready to sell online. We ship to Australiawide!!
cheapest price for the high quality of petrol engine oil, diesel engine oil :)

Visit our website to check the products.

we also have ebay store.

We are very proud to introduce the leading GS Caltex brand "KIXX" lubricants.


28 January 2015

Top 5 Reasons Your Car Is Vibrating

Own a car long enough and there's a good chance you'll develop auto problems of some nature. And one of the most common and most bothersome problems is vibration. What's more, it often creeps up on you gradually and subtly -- until one day you find yourself wondering how you ever put up with such an annoyance.

Perhaps then you asked yourself, what does it mean if my car is vibrating? While there's no substitute for the assessment of someone with an extensive automotive background, you can develop a good feel yourself for diagnosing car problems that are relatively common, such as vibrations.

The fix could be something relatively cheap and simple, like a tire rotation or balance. Or it could signal more serious auto problems -- something more costly, like steering or suspension issues.

Diagnosing car trouble in its early stages may seem like a hassle at first, but you have to remember that it can often save you from bigger car trouble (and bigger repair bills) down the road.

If your vehicle shakes, shimmies or vibrates out of the ordinary, or if you're just interested in preventing those conditions in the first place, keep reading. This article will take a look at the top 5 reasons behind a vibrating car.


1. Tire Problem

We listed tires last, and made them reason #1, since they are so frequently the source of your car's moving vibrations.
The full list of ways in which tire issues can contribute to your vehicular shake, rattle and roll is a long one. But here are just some of the major ones:
  • Car vibrates at certain speeds -- requires tire balance
  • Tires have separated tread -- requires tire replacement
  • Uneven tire wear -- requires tire rotation
  • Tires are "out of round" and roll unevenly - requires tire replacement

Sometimes it isn't the tires, but rather the wheels they're wrapped around that cause your car or truck to vibrate when driven. Watch out for potholes and sloppy road repairs which can both be equally hazardous to your wheels.

Also, keep in mind that these five reasons your car is vibrating aren't the only possible culprits. When in doubt, it's always a good idea to see an automotive service professional.


2. Wobbly Wheels

Often, you'll feel your car vibrating directly through your steering wheel. And one seemingly logical thing to guess is that an alignment issue might be the culprit. But car experts often advise otherwise.

One or more wheels may suffer from excessive "play," or wobbliness, at the hub itself. The diagnosis and cure for this is pretty involved, as it could point to any of a number of issues. First, let's just assume that each wheel is fastened securely to its hub with properly torqued lug nuts.

With that out of the way, the solution to a shaky wheel might entail replacing the wheel bearings. On most modern vehicles, wheel bearings are meant to last the life of the car or truck. But as you may already know, if you subject your vehicle to worse-than-typical wear-and-tear (off-roading, extremely hard driving, high mileage), it's not unheard-of for bearings to wear out.

Another thing to look for is "runout." This is the term that describes how much a wheel deviates from a perfectly circular rotation when it is spun. Wheel technicians use precision instruments to determine if runout on any particular wheel exceeds half an inch. Much of the time -- but not all the time -- the solution is a new wheel.
Other sources of wiggling, wobbly wheels include the tie-rod ends or ball joints. If they're worn out, they'll allow too much play in the wheel. At driving speeds, this translates to annoying vibration.

Wheels prove to be a common culprit when tracking down reasons for why a car is vibrating. But we can narrow it down even more. For our top reason your car is vibrating, go to the next page.


3. Brake Trouble

Do those bad vibrations appear or intensify when you apply the brakes? If so, there's a strong possibility that your car is tooling about with a warped brake rotor, or rotors.

The rotor is the shiny, silver disc-shaped component on vehicles with a disc brake system. The rotor can get bent out of shape due to heavy wear and tear -- basically, overheating from more stopping than that particular rotor can handle. Instead of being uniformly flat all the way across, a deformed rotor is raised or lowered on part of its surface. Thecalipers and brake pads, which squeeze the brake rotors to make the car stop, can't get an even grip on a warped rotor. Hence, vibration.

If you're not handy with a wrench, it's a good idea to see a brake specialist who can tell you the condition of your vehicle's rotors or brake drums (on cars with rear drum brakes).


4. Axel Problems

Our vehicles are full of reciprocating, rotating parts that have to fall within certain measurements, or tolerances, in order to perform properly.

If an axle gets bent -- which is actually quite easy to do in a collision or other mishap -- it will create a jostle of a ride afterward. With this problem, the vibrating often picks up in intensity the faster you drive.

A related problem would be that the driveshaft also needs inspection. This rapidly spinning part transfers engine power to the rear axles and wheels in rear-wheel drive vehicles. If it's bent, shaking may result.

Worn-out constant velocity (CV) joints fall under the same category. If the "boots" -- those rubber, accordion-like coverings around the ends of the drive axles -- are intact, clamps are secure, and no lubricant is seeping out, chances are they're not the problem. But if the boots are torn, that means dirt and dust and road filth is getting in and damaging the joints. For front-wheel drive cars, toasted CV joints mean you'll be buying new drive axles, too.


5. Engine Problems

Sometimes a shake or shudder will emanate from the engine compartment, because the engine isn't getting enough air, fuel or spark that it needs to run smoothly.

Symptoms that might indicate such an engine-related case of the shakes include the following:
  • Shudder or jerking occurs during acceleration
  • Staccato shaking, as if over a highway "rumble strip," within a specific speed range
  • Car starts and drives fine for a while, but later begins to shake

These symptoms could be signaling that it's time for a new set of spark plugs. If the plugs are fine, it could be that the spark plug wires need to be checked (are they connected in the proper order?) or replacing.

Lastly, a dirty air filter or clogged fuel filter can starve the engine of needed oxygen or fuel, respectively. So be sure to replace them at the manufacturer's recommended intervals.

Conventional vs Synthetic engine oil

Video about Conventional vs Synthetic engine oil



The next time you walk in to your local shop to get your oil changed and the service attendant asks you synthetic or regular? You just might have to think twice before you answer...for the sake of your wallet, and yes, the environment too!

First off, synthetic oil is better than conventional oil when it comes to its form and function. Conventional oil could never stand up to synthetic when it comes to longevity and ability to handle extreme high temperatures without breaking down.

But all this advanced technology doesn't come cheap. A synthetic oil change can cost over twice as much as conventional oil...but is it worth it beyond its obvious better performance characteristics?
This is not exactly a straight yes or no answer to go along with this question as there are several variables to consider, but in general, most experts would agree that synthetic is (for now) the lesser of the two evils.

Their logic stems from the fact that while conventional oil is evil because it is derived from petroleum, synthetics are unfortunately formed by chemicals that are no less harmful to the environment... but there is a difference here. Synthetics can last as much as three times longer than conventional oil, which means that you could be dumping less than 15 to 24 quarts of oil per year.
This is of course assuming that you are not recycling your used oil, because if you are, at least a good portion of this oil should be getting reused, but it is quite an extensive process to filter used oil for reuse...so the question still remains, which is better?

For your pocket book, there is not much of a difference if you allow your oil change cycles to last longer with synthetic. There is a debate on when you should change your oil, because the age old consensus has always been every 3 months or 3,000 miles, whichever comes first.

With todays technology, synthetics are cleaner and meaner (just not necessarily any greener). Their composition is much cleaner, because it is derived in a laboratory rather than nature, and it has been proven to have a lower volatility and therefore not vaporize out the exhaust as quickly.

Synthetics have also been shown to produce less resistance in the engine and therefore offer more horsepower and overall efficiency for the engine. This added horsepower in return means that the engine will be able to perform at the same level as before, but using slightly less gas.

Depending on where you drive (dusty, dirty climates), and how much and far you drive (shorter distances don't heat oil enough to boil off condensation in the engine), you can probably last between oil changes for 10,000, 15,000, on up to 20,000 miles with some brands of synthetic.

There is a middle choice to make things even more confusing, the synthetic blend. This mixes the two together to give you a moderately better oil at better cost to you. These don't quite have the longevity of the full synthetics, so it really all comes out in the wash in the end.

If you want to be on the safe side, you can follow what your manufacturer recommends as far as oil goes. In general more performance oriented vehicles require synthetic because of the high heat that builds in these engines, whereas conventional engines don't require anything special.

While synthetics appear to be the more environmentally friendly choice for the moment, there is hope for a vegetable oil (such as canola) alternative that would beat synthetic in both form and function, as well as production price. But the same problem exists here as it does for some biofuel alternatives.
We would have to surrender part of our agricultural crops for food, to produce these crops for motor oil. Food for the planet...or a cleaner environment, why is there never a clearcut choice towards the path of least carbon foot resistance?

Until such a time that we have a more obvious choice, we can continue to make our best informed decisions on engine oil. Sometimes it is not so much a choice of right and a wrong, as it is a choice of the lesser of the two wrongs. Of course, if you are considering going electric, you cold bypass this dilemma altogether!

from http://auto.howstuffworks.com/synthetic-conventional-motor-oil.htm


Synthetic Oil Basics



Technically, Synthetic Oil originates as traditional mineral based motor oil. 

What separates the two is the level of advanced engineering, refinement and criteria that goes into this modern engine lubricant.

In short, there is no other routine maintenance contributor that can provide better protection, performance and longevity than today's Synthetic Motor Oils


Extreme Weather Protection:

Under early morning sub-zero winter starts or summertime high temperature stop-and-go traffic, Synthetic Oils are engineered to deliver vital engine protection and reliable performance year-round.


Cold Weather Pour Test:

In this laboratory test, a Synthetic-Oil and a Synthetic-Mineral-Blend have been frozen overnight at minus 40 below. 

This pour test illustrates conclusively the cold-start readiness of Synthetic Oil. 

Even after six minutes, the blended oil can't keep up. 

And, those white globs you see are wax - a standard component of conventional mineral-based motor oil.

Clearly, Synthetic oil is the best way to ensure that your vital engine components are adequately lubricated during cold cranking.


New & Old:

With very few exceptions, Synthetic Oil is a wise choice for all new and older vehicles.

Modern engine components are built to higher tolerances and levels of precision and the superior lubricating properties of Synthetic Oil deliver the finest day-to-day protection against wear. 

Older-engines, performance-engines and power-plants-under-heavy-load can all benefit from the advanced lubrication and low-abrasion attributes of Synthetic Oil. 

In all situations, engine seals and gaskets are protected and remain pliable and effective.


Compliance:

All major auto manufacturers support and specify the use of API certified lubricants and Synthetic Motor Oil meets and even exceeds all standards and criteria.

The advanced additives developed for Synthetic Oil help contribute to cleaner and more efficient operation during the entire span of the recommended oil change interval.

Factory Warranties remain intact, un-compromised and supported.

In any case, the best warranty is the one you never have to use and proper routine maintenance is an effective way to achieve that long-term goal.

Always check your manual and adhere to the manufacturer's recommended grade.


Compatibility:

Today's Synthetic Motor Oil is fully compatible with traditional mineral based oil. 

This means that you can safely upgrade to synthetic oil... or in a pinch, switch back or partially top-up with conventional mineral oil.


Longevity:

When you factor-in a decrease in engine wear and fuel consumption, upgrading to Synthetic Oil can add up to long term savings and better performance throughout the life of your vehicle.

Ultimately, the goal is for fewer repairs, so that you and your car can spend more of your valuable time on the road and not in the shop.


Since they were first commercially introduced in the mid seventies, Synthetic Motor Oils have constantly evolved to serve the needs of motorist and the cars they drive.

Today, there is no better choice than Synthetic Motor Oils for maintaining engine reliability, performance and protection.

Canadian Tire has the selection, service and know-how to help you with all your engine lubricant and maintenance needs.

from https://www.youtube.com/watch?v=ZivhWIM0Q8s

Oil viscosity

Here is very interesting video about "oil viscosity"
It says about oil viscosity and SAE.


in this video you can comparing between 5W-30, 10W-30, 15W-40, 20W-50 and 30



Viscosity
Viscosity is graded by measuring the time it takes for a standard amount of oil to flow through a standard orifice, at standard temperatures.
The longer it takes, the higher the viscosity and thus higher SAE code.

Paraffin wax
Paraffin wax refers to a white or colorless soft solid that is used as a lubricant and for other applications.